The same RF path as the SCK-2400 (CC2652P, +20 dBm high-power TX) in a much smaller module. No power supply and no headers: power in, UART0, UART1, SPI, I2C, JTAG and spare GPIO come out on castellated edge pads along its two long edges, so you solder it directly onto your own custom board and get AES-128-CCM encrypted CCSDS packets and over-air firmware updates in about 90 seconds.
Product photo coming soon.
A fully programmable CC2652P platform in module form. Our open source (GPLv3) firmware is a working starting point. Program the module over JTAG and change it for your own use case. Hardware design is proprietary.
| Parameter | Value |
|---|---|
| Form factor | Compact solder-down module, approx. 43.7 × 33.6 mm |
| Power | None onboard — supplied by your host board (input requirements TBD) |
| Interfaces | Castellated edge pads on both long edges: power in, UART0, UART1, SPI, I2C, JTAG and spare GPIO (exact per-pad pinout TBD) |
| Programming / debug | JTAG on the edge pads (no 2×5 debug header) |
| RF path | Same as SCK-2400 |
| Microcontroller | TI CC2652P1FRGZ |
| RF Frequency | 2.4GHz ISM band |
| TX Power | +20 dBm (high-power PA) |
| Modulation | 2-GFSK 250 kbps |
| Protocol | CCSDS Space Packet |
| Encryption | AES-128-CCM per-packet |
| OAD | Over-air firmware update in about 90 s |
| Payload interface | 115200 baud UART — Pico bridge |
| Item | Status |
|---|---|
| Package contents | TBD |
| Firmware bringup | Encrypted RF, OAD, GPS and safe mode verified on hardware |
| Module status | TBD |
| Price | TBD |
| Ship date | TBD |
Same firmware, same SCK Ground Station (SCK-2400 mode), same SCK-PBL-1 payload bridge over UART. Pick the SCK-2400 board for development, bench work and HAB/LEO flights; pick the SCK-2400-M when you are building your own board and want the radio soldered right onto it.
| SCK-2400 | SCK-2400-M | |
|---|---|---|
| Power supply | Onboard supply and conditioning | None — from your host board |
| Connections | Headers: power, UART, SPI, I2C | Edge pads on two long edges: power in, UART0, UART1, SPI, I2C, JTAG, spare GPIO |
| Form factor | Same as SCK-915 (larger) | Compact module, approx. 43.7 × 33.6 mm |
| Best for | Development, HAB, LEO | Embedding in your own board |
| RF path | Identical: CC2652P, 2.4 GHz, +20 dBm TX | |